Single strand anchorages are divided into the following bonded and unbonded types and applications. Anchorages are available in the following versions: 1E15, 1ED15, 1EX15, 1EXD15…

Connection G Series Download .PDF The connection on single strand cables is carried out by using a sleeve that allows to guarantee their connection. It…

“D” series passive anchorages are designed for traditional post-tensioning applications where passive anchorages are to be applied. The anchor plate is supplied preassembled with fixing…

This wedge is designed for anchoring single or multiple strands on anchor plates. It is for disposable use and it is available for different applications.

“LX” series plates are designed for the application to plates or slabs. The main characteristic of this anchorage is its dimensions AxB, where the shorter…

“M” series active anchorages are designed for traditional post-tensioning applications. They are used with galvanized or non-galvanized metallic sheaths or polyethylene sheaths. The whole device…

“ME, MEep and MEX “ active anchorages are designed for external post-tensioning and may be supplied with several applications.

Simulations made with finite element codes and laboratory tests allowed to design a compact anchorage to comply with the guidelines ETAG 013.

“Mep®” series active anchorages are designed for post-tensioning applications in an aggressive environment. They offer casting covered in epoxy-polyester coating as corrosion protection and polyethylene…

The anchorage: passive, unbonded and encapsulated, “1EX15-D2” type. It is made with the total encapsulation of the polyethylene covered anchorage, with the greased strand covered…

For use on slabs, preassembled cables can be supplied with the passive anchorage preblocked at one end, which are ready for the installation on site…

“S” series passive anchorages are produced in full accordance with the regulations in force. In this type of anchorage strands are open at the end…

The TTM anchorage is made of an anchor plate, it is equipped with wedges and an under plate for load transferring. In the permanent version…

The TTR-E anchorage is made of an anchor plate equipped with bushes and wedges; the distribution under plate may be used for load transferring when…

Anchoring: active member, such as “1ED15-A18”, is made with the anchor strand and inserted in a polyethylene conduit, application environments where protection is required in…