Protection caps for TTM and TTM-F anchorages are designed to allow the complete grouting of grease of the anchorage. Their small dimensions allow a localized…

All the tubes used are 16x20 mm. In special cases, where the insertion of all the tubes is difficult due to dimensions, 11.5x14 mm o…

The double piston for I.R.S. groutings type XG27-600is produced with a highly resistant spring, allowing flexibility; it compensates for the natural deviations of the valvate…

DD0015-CV bush covers guarantee protection against corrosion on elementary anchorages, both on temporary and on permanent anchors. DD0015-CV are particularly effective on applications with temporary…

All permanent anchors have an end cap connected to the corrugated protection sheath. The plastic end cap is fixed to the corrugated sheath with a…

All permanent anchors have an end cap connected to the corrugated protection sheath. The plastic end cap is fixed to the corrugated sheath with a…

The grouting and vent of grouted cables is carried out by means of several systems designed to make activities on site as easy as possible.

The cap is made up of a cover equipped with a sealing gasket fixed to the casting by means of suitable anchorages which vary in…

DD-DS internal spacers are designed to allow the anchor in the foundation to guarantee the sinusoid effect of the strands inside the corrugated sheaths, as…

The DE150KN load cell is designed for the installation on ground anchors, and in particular on single strands anchored to plates. Their shape and dimensions…

DD-RC connections are made for corrugated sheaths. They allow to connect sheaths by adapting different diameters and with enlargements and narrowings. They can be screwed…

Pocket formers are produced for single strand applications in order to create, by means of special reusable plastic moulds, recesses that allow sealing after anchorage…

In an aggressive environment, the anchor head must be immediately protected, both with temporary and with permanent anchors. The protection inside the heat provides an…

Metallic or polyethylene sheaths represent the most economical means to create voids in post-tensioned elements. They provide a good secondary protection against corrosion and a…

The DD-SF spherical support allows the installation of temporary and permanent ground anchors. The spherical cap rests on a support that transfers the force to…

The purpose of the under plate protection is to provide an effective connection/protection between the sheath of the free length and the anchorage.